How to Use Pace, Heart Rate, and Effort to Understand Your Runs

| 5 min read
The same pace can represent two very different runs. If your breathing is strained and your heart rate is higher than usual, holding steady may mean your body is working harder than the pace suggests. That’s why a watch’s pace readout is useful, but incomplete. Heat, hills, fatigue, and stress can all change how a familiar effort feels. The tricky part is deciding which signals matter and what to do with them. Ignore the clues, and you might push too hard on an easy day or miss the intended effort in a speed session. Repeated over time, that can throw off the balance between training and recovery—and make it harder to build fitness for race day. Ultramarathon runner and endurance coach Nick Farr, head coach and founder of [P3 Fitness](https://www.p3fitness.co/about-p3), groups those clues into three categories: performance output, biological load, and subjective feedback. The idea is simple: judge a run by what you did, how your body responded, and how the effort felt. The numbers won’t make the decision for you, but together they can make it easier to see whether the workout served its purpose.

Why Your Run Data Needs Context

“No single metric tells you the whole story [of a run],” Farr says. Pace can tell you how fast you ran. It can’t tell you how hard that pace felt or how your body handled it. Farr’s three categories each answer a different question: - **Performance output:** What work are you doing? - **Biological load:** How is your body responding to that work? - **Subjective feedback:** How does the effort feel? Read together, those signals can help you decide whether to stay on plan or adjust. They can also put a slower split in perspective when conditions, [fatigue](https://www.runnersworld.com/health-injuries/a71294066/best-way-to-measure-fatigue/), or another strain changes the cost of running.

Performance Output: What You Did

Performance output covers the work you can measure: pace, [speed](https://www.runnersworld.com/training/a65616598/how-form-impacts-running-pace/), distance, time, elevation, [cadence](https://www.runnersworld.com/training/a64422354/why-cadence-matters-for-running/), stride length, and power, Farr says. These numbers show what you accomplished. They let you compare how quickly you covered a route, how far you went, or how much climbing you did, then track changes across runs. But output can hide the effort behind it. You might run your usual pace on an easy day while heat or fatigue makes that pace unusually taxing. A familiar split doesn’t guarantee a familiar workout.

Biological Load: How Your Body Responded

Biological load, also called internal or physiological load, describes your body’s response to the work. [Heart rate](https://www.runnersworld.com/training/a73607532/heart-rate-training-zones-guide/), [breathing rate](https://www.runnersworld.com/training/a64892598/breathing-techniques-for-runners/), oxygen consumption, and core temperature can all help show what a given pace demands in different conditions or stages of training. Consider a 90-degree July run. You may hold your usual pace, but your heart rate and breathing can climb as your body works to maintain it. Those signals reveal more about the run’s cost than pace does by itself. You don’t need to monitor every marker. Farr suggests starting with one you can track, such as [heart rate](https://www.runnersworld.com/training/a71376082/what-is-average-running-heart-rate/), and learning how it relates to your intended effort. Over time, comparisons between similar runs can help you spot when your body is working harder—or less hard—at a familiar pace.

Subjective Feedback: How It Felt

Subjective feedback is your own read on the effort. You might rate it using [rate of perceived exertion, or RPE](https://www.runnersworld.com/training/a29706103/what-is-rpe/), on a scale from 1 to 10. You could also ask whether you can [carry on a conversation](https://www.runnersworld.com/training/a44869827/talk-test/) during an easy run, or notice when your legs [feel heavy](https://www.runnersworld.com/training/a74178628/running-fatigue-vs-tired-legs/) near the end of a speed workout. That personal read adds context a watch can’t capture. A pace that usually feels comfortable may feel demanding when you’re stressed or carrying fatigue. If you notice the shift, you have a reason to look at your other signals and decide whether the session needs an adjustment. Farr encourages [newer athletes](https://www.runnersworld.com/beginner/g32266781/beginner-runner-tips/) to run by perceived effort alone at first. After a few weeks of learning how different intensities feel, they can add pace and heart rate to build a fuller picture of how to approach workouts.

The Value Comes From Combining the Signals

Each category tells you something, but Farr recommends using at least one measure from each during a run or workout. His starting rule: when two of the three categories agree, let those two guide your decision in the moment. Return to the easy run. Your pace matches the plan, but your heart rate is elevated and the effort feels unusually hard. Biological load and subjective feedback both suggest you’re paying more than usual to hold that speed. Slowing down may better serve the [goal of the easy run](https://www.runnersworld.com/training/a73487190/coach-bennett-easy-pace-tips/): running comfortably to build mileage, support recovery, and develop your aerobic system. The signals can point the other way, too. On a cool day, the planned pace might feel easy while your heart rate stays lower than usual. Depending on the workout, Farr says, that could be a reason to increase the effort slightly. The point is to judge the numbers against the session’s purpose. A slower pace doesn’t automatically make a workout less useful if your body’s response matches the effort you intended. “On any given day, the pace may look slightly different, and that’s totally fine,” Farr says. “That’s just a shift of the output, not a shift of the value of the workout.”

How to Use the System in Your Training

You don’t need to stare at your watch or dissect every sensation mid-run. Start with the workout’s purpose, check how your signals relate, then use what you learn to inform future sessions. 1. **Before you run, name the workout’s purpose.** Decide what you’re trying to accomplish and what effort the session calls for. For an easy run, consider what “easy” should feel like and which signals can help you keep it controlled. 2. **During the run, compare the categories.** Notice your output, check how your body feels, and pay attention to a biological marker you can track. If the signals don’t line up, consider whether conditions or [fatigue](https://www.runnersworld.com/health-injuries/a44481673/tiredness-and-fatigue-symptoms/) explain the gap—and whether changing your effort would better fit the workout’s goal. Farr keeps pace and time on one watch screen and heart rate on another. He can check the data when he wants while still noticing how the run feels. 3. **Afterward, make a record.** Review your output and biological data, and note how the run felt and what conditions you faced. Those details give you a useful comparison for future sessions. If you repeat a speed workout from a cool spring day in summer heat, for example, your log can help you see why you might need to slow down to match the intended effort. 4. **Look for patterns over time.** Farr suggests choosing a familiar route, running it at a consistent pace, and periodically comparing heart rate and perceived effort. If you usually try new routes, return to the same one once a month. [Similar conditions](https://www.runnersworld.com/training/a65353833/repeat-speed-workouts/) make comparisons more useful. If the pace gradually feels easier or comes with a lower heart rate, that may be a [sign of improving fitness](https://www.runnersworld.com/training/a74145567/running-progress-training-signs/).

Learn to trust your pace by feel

The watch can tell you how fast you’re running. Learning to predict that pace before you look is what helps you control it. Farr recommends guessing your speed during workouts, then checking the watch to see how close you were. If your threshold pace is about 8:00, for instance, try a controlled interval at roughly 7 or 8 out of 10 effort, estimate your pace, and compare. Repeating that exercise can help you find the intended speed sooner instead of spending each rep accelerating and backing off. That skill matters beyond hitting a number. Connecting pace with effort and your body’s response can help keep easy runs genuinely easy, make hard sessions deliver the stimulus you planned, and leave enough room to recover before the next workout. The data doesn’t explain every sensation, but the more accurately you read those signals, the less you have to rely on mid-run corrections. String enough well-paced, well-recovered sessions together and you’re more likely to build fitness steadily, reach the starting line prepared, and race faster. That’s the payoff: better judgment on an ordinary training day can shape what you’re able to do on race day.
Source: Thomas Williams · www.runnersworld.com